Fiber Bundle Filter With A Adjustable Plate

一. Brief Introduction

The fiber filter with a regulating plate is mainly composed of a shell, a fixed supporting porous plate installed in the shell and a regulating porous plate, a fiber bundle filter element fixed between the fixed supporting porous plate and the regulating porous plate, and an inlet and an outlet installed on the shell. In order to obtain a good cleaning effect, the equipment is also provided with a cleaning air inlet and an outlet.

The adjusting porous plate is fixed on the housing with a fixing adjusting device. One end of the fiber bundle filter element is fixed on the adjusting porous plate with a high-quality nylon rope. The surplus length of the rope is equal to the stretching distance required by the fiber bundle filter element in working and cleaning, and the other end is connected to the fixing supporting porous plate. This kind of high efficiency fiber filter adjustment porous plate is usually in a static state when the filter works. It will not be affected by the water flow and move with the compression ｏｒ relaxation of the fiber filter layer.

In order to ensure the cleaning effect, the regulating plate type fiber bundle filter is set with an inverted u-shaped tube connected to the shell, and an air pipe is set at the top of the inverted u-shaped tube. The air pipe can destroy the siphon phenomenon of the inverted u-shaped tube, which can ensure that no matter how the water flow rate changes, the fiber filter layer is always immersed in water during the cleaning process to ensure the cleaning effect.

The adjustment plate fiber bundle filter adopts anti-pollution fiber bundle filter material after special treatment, so it can obtain good cleaning effect and prolong the operating cycle.

二. Adjustment plate type fiber filter specification table